Spray Foam Insulation Charleston, WV

​At Enviroseal Spray Foam, one of the areas that we extend our services to is Charleston, WV. If you are looking for a new insulation material or want to replace your existing insulation, spray foam insulation in Charleston, WV is a great choice.
Spray foam insulation has many advantages over other types of insulation like cellulose or fiberglass insulation. Before you opt for spray foam insulation in Charleston, WV, it is important to have adequate knowledge about it. This helps you to make an informed decision about your insulation projects. 

What is R-Value?

R-value is the ability of a material to resist heat flow. Different insulation materials have varying R-values. Cellulose has an R-value of around R-3.5 inch and fiberglass has an R-value between 2.2 to 2.7 per inch. Foam insulation has an R-value between R- 3.7 and 6.5 per inch. The R-value for open cell spray foam and closed cell spray foam differ.

The higher the R-value of the insulation material, the better is the insulating property. R-value also depends on other factors like the thickness of the material and the type of insulation that you are using. The R-value for open cell spray foam and closed cell spray foam differ.

Generally, the higher the R-value of the insulation material, the better is the insulating property. R-value also depends on other factors like the thickness of the material, and the type of insulation that you are using. Other than this, temperature, aging, and moisture can affect the R-value of most types of insulation.

Different areas in your building will require a different value. For example, the R-value for attic insulation should be between R-49 and 60 but for wall insulation, it should be between R-13 and 21. The R-value for spray foam insulation in Charleston, WV can differ depending on the manufacturer, and the product itself.

How is Spray Foam Insulation Applied?

Spray foam insulation in Charleston, WV is applied on the job site itself as a liquid but it quickly hardens because of the result of a chain reaction between the two chemicals. The hardening time may be just a few seconds and depending on the product used, it can take a couple of minutes or a few hours to cure. This makes it one of the best insulation options and it can be used in almost all areas of a building.

When installing spray foam insulation in Charleston WV, all professional insulation contractors use personal protective equipment (PPE). This includes chemically resistant gloves, a mask and a respirator, a full body suit, and covers for shoes. Ventilation is very important and your insulation contractor will take care to minimize exposure to the spray foam chemicals.

Should you Opt for DIY Spray Foam Insulation?

You may have thought about doing a DIY spray foam insulation project, but it is not as easy as it seems. Spray foam insulation in Charleston, WV should always be installed by a professional insulation contractor who has adequate experience and knowledge. Here are some reasons why a DIY project may not be the best option for you.

You need protective gear

Spray foam insulation contractors use specialized equipment and protective gear when installing spray foam insulation in Charleston, WV. You may not have all of the correct equipment and PPE at home to protect you from the harmful spray foam insulation chemicals.

Potential fire hazard

The vapors that are given off from spray foam insulation can be hazardous if it comes in contact with a flame. This is why there should be no open flames or ignition sources nearby when spray foam is being installed. Insulation contractors will always thoroughly check the area and make sure that it is safe to install.

The consistency needs to be right

Spray foam insulation in Charleston, WV has to be applied at the correct consistency for it to stick well. It could end up becoming too wet or too sticky and this could end up in a mess and a waste of resources. Sometimes the spray gun can get jammed with the chemicals, and this could lead to all the materials getting spoilt.

Too much form spray foam

The insulation needs to be applied at a certain thickness to achieve the correct R-value. If you are not a professional, you may end up over-spraying the area in order to achieve the necessary R-value, but it may just be a waste of resources. An insulation contractor on the other hand will know exactly how much spray form to use.

Other Services That We Offer

Some other services that our company offers are listed below.

Spray foam insulation

Enviroseal offers both closed cell as well as open cell spray foam insulation at affordable costs and options.

​Both open cell spray foam as well as closed cell spray foam insulation in Charleston, WV is capable of providing a complete air seal. If you are on a limited budget, open cell spray foam could be a better option for you.

Insulation removal

Before installing spray foam insulation in Charleston, WV, the old cellulose or fiberglass insulation needs to be removed.

​Our team is well equipped to remove your old insulation and we can also dispose of it properly and in an environmentally friendly manner.

Thermal barrier coating

Thermal barrier coatings (TBCs) are advanced material systems that are applied to metallic services like gas turbines or aero-engine parts that operate at elevated temperatures and form a part of exhaust heat management. Our company deals with thermal barrier coatings as well.

Extensive cleanup

After the job is done you do not have to worry about cleaning up because we will take care of this for you. Cleaning up is part of our routine and we will always respect your property and belongings.

Contact Us

Contact us if you need to install spray foam insulation in Charleston, WV. We take care of home insulation, commercial insulation as well as agricultural insulation. We will be happy to answer any questions that you may have regarding spray insulation in Charleston, WV. 

(304) ​533-0598